lamella clarifier water treatment wastewater treatment lamella tube settler clarifier tank for sale

lamella clarifier
The lamella clarifier sediments water purifier is format by install 60° dip angle inclined tube above the sludge suspended layer, to make the suspended solids or floc alum flower by dosing flocculant accumulate into thin sludge later in inclined tube downside superficial area, slide back to sludge suspended layer rely on gravity, then settling in sludge collecting hopper, discharge into sludge tank by sludge pipe for separate treatment or comprehensive utilization. The supernatant fluid gradually rise to water collecting pipe discharge or reuse.

Feature:

1.simple structure without wearing parts wear well decrease maintenance

2.steady operation easy operation

3.small power save energy

4.small occupy area, low investment, high efficient

5.short retention time, high sediment efficiency, no sludge backflow.

Application scope：

1. electroplate effluent contain many kinds of metal ion, cr,cu,Fe,Zn ,Ni etc remove rate all above 90%, after treatment, all can reach discharge standard.

2. coal mine,mineral processing waste water all can make the turbidity from 500-1500 mg/L reduce to 5 mg/L.

3. printing and dyeing,bleach and dye etc effluent chroma removing rate reach 70~90%,COD remove rate 50-70%.

4. Tannery ,food etc industrial sewage COD remove rate 50~80%, impurity solids remove rate above 90%.

5). chemical waste water COD remove rate 60~70%, chroma removal rate 60~90%, suspended solids reach discharge standard.

Product information

Working Process
Many dense inclined pipes or inclined plates are set in the re-settlement area,so that the suspended impurities in the water
are precipitated in the inclinedplate or inclined pipe.
The water flows up along the inclined plate or inclined pipe, and the separated mud and slag slides down
to the bottom of the poolunder the action of gravity, and is discharged in a concentrated manner

Product features
1.Simple structure, no wearing parts, durable, reduce maintenance
2.Stable operation and easy operation
3.Less power and energy saving
4. Covers an area of province, less investment, fast start-up, high efficiency



Exterior design:
Carbon steel Q235A is used, usually 6MM thick. If the customer has other require-ments, can be customized. Stainless steel 304,316,316 L

Interior design:
Internal anticorrosion using epoxy asphalt, can also be lined with glue, lined with plas-tic,
lined with glass fiber reinforced plastic, lined with tetrafluoroethylene, etc.


01
PLC REMOTE AUTOMATIC CONTROL
Automatic control system, stableoperation, easy to operate,improveprecipitation efficiency

02
UNIFORM CLOTH WATER
such as resistance cloth water,uniformcloth water, reduce distur-bance.

03
INCLINED PIPE PACKING
The packing is hexagonalhoney-comb inclined pipe packing, thematerial is polypropylene,glassfiber reinforced plastic, etc

04
GOOD APPLICABILITY
High resistance to impact load, canadapt to different water qualitytreatmentprocess